Connecting rod HOT RODS for HUSABERG FE, KTM EXCF, SXF 250 from 2007 to 2013

HOT RODS offers you this complete connecting rod kit for your KTM SXF 250cc, HUSABERG FE 250cc and KTM EXCF 250cc. This complete package will allow you to refurbish your crankshaft that may have some play from top to bottom. Rather than changing the complete crankshaft, you will often only need to change the connecting rod. This connecting rod is a cast model sold with its needle cage, its anti-friction shims and its crank pin. It has the same original dimensions. No adaptation is required. To change a connecting rod, you will need a press, a balancing bench and a little patience. If you don't have the material to do that, you can send us your crankshaft so that we can do the assembly ourselves. You can contact us first by e-mail to get a quote. All the dimensions of the connecting rod are given below.

Technical data :

Big End I.D. connecting rod: 38mm

Width of connecting rod head: 17.900mm

Center to Center Connecting Rod: 98mm

Small end connecting rod I.D.: 16mm

Connecting rod width: 17.900mm

Engine type: 4 stroke

Includes connecting rod, crank pin and crank bearing

Spindle length: 53.700mm

Fits on :

HUSABERG FE 250 2013

KTM 250 EXC-F FACTORY EDITION 2011

KTM 250 EXC-F FACTORY EDITION 2010

KTM 250 EXC-F SIX DAYS 2013

KTM 250 EXC-F SIX DAYS 2012

KTM 250 EXC-F SIX DAYS 2011

KTM 250 EXC-F SIX DAYS 2010

KTM 250 EXC-F SIX DAYS 2009

KTM 250 EXC-F SIX DAYS 2008

KTM 250 EXC-F SIX DAYS 2007

KTM 250 EXC-F 2013

KTM 250 EXC-F 2012

KTM 250 EXC-F 2011

KTM 250 EXC-F 2010

KTM 250 EXC-F 2009

KTM 250 EXC-F 2008

KTM 250 EXC-F 2007

KTM 250 SX-F FACTORY EDITION KEN ROCZEN 2012

KTM 250 SX-F FACTORY EDITION MARVIN MUSQUIN 2011

KTM 250 SX-F FACTORY EDITION MARVIN MUSQUIN 2010

KTM 250 SX-F 2012

KTM 250 SX-F 2011

KTM 250 SX-F 2010

KTM 250 SX-F 2009

KTM 250 SX-F 2008

KTM 250 SX-F 2007

KTM 250 SX-F 2006