Carburetor MIKUNI VM 28mm idle screw left

MIKUNI offers this VM type carburetor in 28mm with left idle screw for motocross, enduro, trial, quad, mechaboite, scooter, ... in 2 strokes. This carburetor is one of the simplest in thermmes of installation and adjustment. It has been studied so that the most novice of us can easily install and adjust it. The ball is a round model to have a stable carburetor at any speed compared to the flat ball which is certainly very responsive but works less well at throttle for example. We recommend this carburetor for those who ride enduro, trial, quad, touring, road,... In short we recommend it to all those who are not handle in the angle all the time. The tank is made of aluminum and is equipped with a cap to easily and quickly remove the main nozzle, idle and needle well without removing the carburetor from the bike.

The basic settings are:

Main jet MKA 200

Idle jet MKP 60

Needle size 2.5

Needle size 3.2

The measurement of this carburetor is:

Outside diameter of the pipe 35mm

Length of the filter to the carburetor plug is 93mm

Total height from plug to cup cover is 125mm

Outside diameter of air filter side is 44mm

If you need a part do not hesitate to contact us by mail through the form on the site.