Cam shaft HOT CAMS stage 1 for SUZUKI RMZ 250 from 2010 to 2015

HOT CAMS offers you these stage 1 camshaft to equip your SUZUKI RMZ 250cc motocross. This pack includes the exhaust and intake camshaft. This camshaft takes the same place and the same timing as the original one. However, the opening times have been taken over to increase the performance of your motocross. During our dyno test we noticed that the engine had much more torque from start up and a much better mid range recovery. It can be mounted on an original cylinder but also the BIG BORE kit like the ATHENA for example. Ideal to increase quickly and easily the performance of your motocross. Contractual photo to come

Here are the technical data of these camshafts:

Exhaust duration (degrees at 1mm): 239°

Exhaust lobe center (degrees): 103

Exhaust valve clearance (mm): 0.200mm

Exhaust cam lobe lift: 8.380mm

Intake cam lobe lift: 9.400mm

Intake duration (degrees at 1mm): 237°

Intake lobe center (degrees): 99

Intake valve clearance (mm): 0.100mm

Fits on:

SUZUKI RM-Z 250 250 2015

SUZUKI RM-Z 250 250 2014

SUZUKI RM-Z 250 250 2013

SUZUKI RM-Z 250 250 2012

SUZUKI RM-Z 250 250 2011

SUZUKI RM-Z 250 250 2010